zabbix_export:
  version: '7.0'
  template_groups:
    - uuid: e960332b3f6c46a1956486d4f3f99fce
      name: 'Templates/Server hardware'
  templates:
    - uuid: 7b6c6228b25f4586b42cd1bf37ff8034
      template: 'SMART by Zabbix agent 2'
      name: 'SMART by Zabbix agent 2'
      description: |
        The template for monitoring S.M.A.R.T. attributes of physical disk that works without any external scripts. It collects metrics by Zabbix agent 2 version 5.0 and later with Smartmontools version 7.1 and later. Disk discovery LLD rule finds all HDD, SSD, NVMe disks with S.M.A.R.T. enabled. Attribute discovery LLD rule have pre-defined Vendor Specific Attributes for each disk, and will be discovered if attribute is present.
        
        You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/415662-discussion-thread-for-official-zabbix-smart-disk-monitoring
        
        Generated by official Zabbix template tool "Templator"
      vendor:
        name: Zabbix
        version: 7.0-0
      groups:
        - name: 'Templates/Server hardware'
      discovery_rules:
        - uuid: 4575af2717ec4bf78645edb84a966c84
          name: 'Disk discovery'
          key: smart.disk.discovery
          delay: 1h
          filter:
            evaltype: AND
            conditions:
              - macro: '{#NAME}'
                value: '{$SMART.DISK.NAME.MATCHES}'
              - macro: '{#NAME}'
                value: '{$SMART.DISK.NAME.NOT_MATCHES}'
                operator: NOT_MATCHES_REGEX
          description: 'Discovery SMART disks.'
          item_prototypes:
            - uuid: 643de316ae644f6d8fd92d1f03ae0360
              name: 'SMART [{#NAME}]: Bad_Block_Rate'
              type: DEPENDENT
              key: 'smart.disk.attribute.bad_block_rate[{#NAME}]'
              discover: NO_DISCOVER
              description: 'Percentage of used reserve blocks divided by total reserve blocks.'
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.bad_block_rate.value
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: attribute
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
            - uuid: 2a055383835247bc83745c84fdc5dea9
              name: 'SMART [{#NAME}]: Power_Cycle_Count'
              type: DEPENDENT
              key: 'smart.disk.attribute.power_cycle_count[{#NAME}]'
              discover: NO_DISCOVER
              description: 'This attribute indicates the count of full hard disk power on/off cycles.'
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.power_cycle_count.value
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: attribute
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
            - uuid: e1fbae7fe66c453997d9aa6e6eb3b5cb
              name: 'SMART [{#NAME}]: Program_Fail_Count_Chip'
              type: DEPENDENT
              key: 'smart.disk.attribute.program_fail_count_chip[{#NAME}]'
              discover: NO_DISCOVER
              description: 'The total number of flash program operation failures since the drive was deployed.'
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.program_fail_count_chip.value
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: attribute
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
            - uuid: abb098035cbd4c5b9e2d15c1e95d8e34
              name: 'SMART [{#NAME}]: Raw_Read_Error_Rate'
              type: DEPENDENT
              key: 'smart.disk.attribute.raw_read_error_rate[{#NAME}]'
              discover: NO_DISCOVER
              description: 'Stores data related to the rate of hardware read errors that occurred when reading data from a disk surface. The raw value has different structure for different vendors and is often not meaningful as a decimal number. For some drives, this number may increase during normal operation without necessarily signifying errors.'
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.raw_read_error_rate.value
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: attribute
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
            - uuid: 5601bfa6a38940b6b8d695bf029f534c
              name: 'SMART [{#NAME}]: Reallocated_Sector_Ct'
              type: DEPENDENT
              key: 'smart.disk.attribute.reallocated_sector_ct[{#NAME}]'
              discover: NO_DISCOVER
              description: 'Disk discovered attribute.'
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.reallocated_sector_ct.value
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: attribute
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
            - uuid: f538f4708280451eb30d20433d133012
              name: 'SMART [{#NAME}]: Reported_Uncorrect'
              type: DEPENDENT
              key: 'smart.disk.attribute.reported_uncorrect[{#NAME}]'
              discover: NO_DISCOVER
              description: 'The count of errors that could not be recovered using hardware ECC.'
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.reported_uncorrect.value
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: attribute
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
            - uuid: 70ac7d6cdf29431cacf02fc716c8ab0c
              name: 'SMART [{#NAME}]: Seek_Error_Rate'
              type: DEPENDENT
              key: 'smart.disk.attribute.seek_error_rate[{#NAME}]'
              discover: NO_DISCOVER
              description: 'Rate of seek errors of the magnetic heads. If there is a partial failure in the mechanical positioning system, then seek errors will arise. Such a failure may be due to numerous factors, such as damage to a servo, or thermal widening of the hard disk. The raw value has different structure for different vendors and is often not meaningful as a decimal number. For some drives, this number may increase during normal operation without necessarily signifying errors.'
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.seek_error_rate.value
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: attribute
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
            - uuid: 6e08c65d77ca4155b396c9615b2f45b3
              name: 'SMART [{#NAME}]: Spin_Up_Time'
              type: DEPENDENT
              key: 'smart.disk.attribute.spin_up_time[{#NAME}]'
              discover: NO_DISCOVER
              description: 'Average time of spindle spin up (from zero RPM to fully operational [milliseconds]).'
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.spin_up_time.value
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: attribute
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
            - uuid: e428eb3368e94dbc955f2bebf8feb202
              name: 'SMART [{#NAME}]: Start_Stop_Count'
              type: DEPENDENT
              key: 'smart.disk.attribute.start_stop_count[{#NAME}]'
              discover: NO_DISCOVER
              description: 'A tally of spindle start/stop cycles. The spindle turns on, and hence the count is increased, both when the hard disk is turned on after having before been turned entirely off (disconnected from power source) and when the hard disk returns from having previously been put to sleep mode.'
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.start_stop_count.value
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: attribute
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
            - uuid: c186f7ce1b8d4311997c84fd5c239819
              name: 'SMART [{#NAME}]: Critical warning'
              type: DEPENDENT
              key: 'smart.disk.critical_warning[{#NAME}]'
              description: 'This field indicates critical warnings for the state of the controller.'
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.critical_warning
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
            - uuid: 72f16a701cee4119b0b1865671fd448d
              name: 'SMART [{#NAME}]: Smartctl error'
              type: DEPENDENT
              key: 'smart.disk.error[{#NAME}]'
              value_type: TEXT
              description: 'This metric will contain smartctl errors.'
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.error
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 1h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
            - uuid: 849a9d5c9b9d4b969a09ab5cf4629ded
              name: 'SMART [{#NAME}]: Exit status'
              type: DEPENDENT
              key: 'smart.disk.es[{#NAME}]'
              description: |
                The exit statuses of smartctl are defined by a bitmask but in decimal value. The eight different bits in the exit status have the following  meanings  for  ATA disks; some of these values may also be returned for SCSI disks.
                Bit 0: Command line did not parse.
                Bit 1: Device  open failed, device did not return an IDENTIFY DEVICE structure, or device is in a low-power mode (see '-n' option above).
                Bit 2: Some SMART or other ATA command to the disk failed, or there was a checksum error in a SMART data  structure  (see '-b' option above).
                Bit 3: SMART status check returned "DISK FAILING".
                Bit 4: We found prefail Attributes <= threshold.
                Bit 5: SMART  status  check returned "DISK OK" but we found that some (usage or prefail) Attributes have been <= threshold at some time in the past.
                Bit 6: The device error log contains records of errors.
                Bit 7: The device self-test log contains records of errors. [ATA only] Failed self-tests outdated by a newer successful extended self-test are ignored.
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.exit_status
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
              trigger_prototypes:
                - uuid: c51b609f267c45c3bcb4a3f5f40b6d35
                  expression: |
                    ( count(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2) = 1 and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),8) = 8 )
                    or ( bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),8) = 8
                    and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),8) > bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2),8) )
                  recovery_mode: NONE
                  name: 'SMART [{#NAME}]: Check returned "DISK FAILING"'
                  priority: HIGH
                  description: 'SMART status check returned "DISK FAILING".'
                  manual_close: 'YES'
                  tags:
                    - tag: scope
                      value: notice
                - uuid: 12ed61dfd27c4666883c4240a5726d06
                  expression: |
                    ( count(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2) = 1 and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),1) = 1 )
                    or ( bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),1) = 1
                    and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),1) > bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2),1) )
                  recovery_mode: NONE
                  name: 'SMART [{#NAME}]: Command line did not parse'
                  priority: HIGH
                  description: 'Command line did not parse.'
                  manual_close: 'YES'
                  tags:
                    - tag: scope
                      value: notice
                - uuid: 9b960cb324774b3fa5e3d39aeb3141e2
                  expression: |
                    ( count(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2) = 1 and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),2) = 2 )
                    or ( bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),2) = 2
                    and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),2) > bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2),2) )
                  recovery_mode: NONE
                  name: 'SMART [{#NAME}]: Device open failed'
                  priority: HIGH
                  description: 'Device open failed, device did not return an IDENTIFY DEVICE structure, or device is in a low-power mode.'
                  manual_close: 'YES'
                  tags:
                    - tag: scope
                      value: notice
                - uuid: ccff1b75f69a47cdbb5a04c58d201a0f
                  expression: |
                    ( count(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2) = 1 and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),64) = 64 )
                    or ( bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),64) = 64
                    and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),64) > bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2),64) )
                  recovery_mode: NONE
                  name: 'SMART [{#NAME}]: Error log contains records'
                  priority: HIGH
                  description: 'The device error log contains records of errors.'
                  manual_close: 'YES'
                  tags:
                    - tag: scope
                      value: notice
                - uuid: 69fb021abcc841b7b35cc93358ef085c
                  expression: |
                    ( count(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2) = 1 and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),128) = 128 )
                    or ( bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),128) = 128
                    and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),128) > bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2),128) )
                  recovery_mode: NONE
                  name: 'SMART [{#NAME}]: Self-test log contains records'
                  priority: HIGH
                  description: |
                    The device self-test log contains records of errors. [ATA only]
                    Failed self-tests outdated by a newer successful extended self-test are ignored.
                  manual_close: 'YES'
                  tags:
                    - tag: scope
                      value: notice
                - uuid: 4ad2fbb5b6e349f6852a489b99a2760d
                  expression: |
                    ( count(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2) = 1 and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),32) = 32 )
                    or ( bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),32) = 32
                    and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),32) > bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2),32) )
                  recovery_mode: NONE
                  name: 'SMART [{#NAME}]: Some Attributes have been <= threshold'
                  priority: HIGH
                  description: |
                    SMART status check returned "DISK OK" but we found that some (usage
                    or prefail) Attributes have been <= threshold at some time in the past.
                  manual_close: 'YES'
                  tags:
                    - tag: scope
                      value: notice
                - uuid: 592e647842d048e3985e65726cdc838c
                  expression: |
                    ( count(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2) = 1 and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),4) = 4 )
                    or ( bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),4) = 4
                    and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),4) > bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2),4) )
                  recovery_mode: NONE
                  name: 'SMART [{#NAME}]: Some command to the disk failed'
                  priority: HIGH
                  description: |
                    Some SMART or other ATA command to the disk failed,
                    or there was a checksum error in a SMART data structure.
                  manual_close: 'YES'
                  tags:
                    - tag: scope
                      value: notice
                - uuid: ec137781d51249c89d8891a35a596445
                  expression: |
                    ( count(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2) = 1 and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),16) = 16 )
                    or ( bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),16) = 16
                    and bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}]),16) > bitand(last(/SMART by Zabbix agent 2/smart.disk.es[{#NAME}],#2),16) )
                  recovery_mode: NONE
                  name: 'SMART [{#NAME}]: Some prefail Attributes <= threshold'
                  priority: HIGH
                  description: 'We found prefail Attributes <= threshold.'
                  manual_close: 'YES'
                  tags:
                    - tag: scope
                      value: notice
            - uuid: 805e1d6f91e741ac93e87bd7d62860d5
              name: 'SMART [{#NAME}]: Get disk attributes'
              key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              history: '0'
              value_type: TEXT
              tags:
                - tag: component
                  value: raw
                - tag: component
                  value: storage
            - uuid: 365f9642f2764116923bb3e014eefa22
              name: 'SMART [{#NAME}]: Power on hours'
              type: DEPENDENT
              key: 'smart.disk.hours[{#NAME}]'
              description: |
                Count of hours in power-on state. The raw value of this attribute
                shows total count of hours (or minutes, or seconds, depending on manufacturer)
                in power-on state. "By default, the total expected lifetime of a hard disk
                in perfect condition is defined as 5 years (running every day and night on
                all days). This is equal to 1825 days in 24/7 mode or 43800 hours." On some
                pre-2005 drives, this raw value may advance erratically and/or "wrap around"
                (reset to zero periodically). https://en.wikipedia.org/wiki/S.M.A.R.T.#Known_ATA_S.M.A.R.T._attributes
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.power_on_time
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
            - uuid: 8478d6421fb044339e2118848ac6d56b
              name: 'SMART [{#NAME}]: Media errors'
              type: DEPENDENT
              key: 'smart.disk.media_errors[{#NAME}]'
              description: |
                Contains the number of occurrences where the controller detected
                an unrecovered data integrity error. Errors such as uncorrectable ECC, CRC
                checksum failure, or LBA tag mismatch are included in this field.
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.media_errors
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
            - uuid: b6abf9b52c694600b63fce4a68fc0fbd
              name: 'SMART [{#NAME}]: Device model'
              type: DEPENDENT
              key: 'smart.disk.model[{#NAME}]'
              value_type: CHAR
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.model_name
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: inventory
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
            - uuid: 6ce46d274a694eac9700bd02a936f4be
              name: 'SMART [{#NAME}]: Percentage used'
              type: DEPENDENT
              key: 'smart.disk.percentage_used[{#NAME}]'
              units: '%'
              description: |
                Contains a vendor specific estimate of the percentage of NVM subsystem
                life used based on the actual usage and the manufacturer's prediction of NVM
                life. A value of 100 indicates that the estimated endurance of the NVM in
                the NVM subsystem has been consumed, but may not indicate an NVM subsystem
                failure. The value is allowed to exceed 100. Percentages greater than 254
                shall be represented as 255. This value shall be updated once per power-on
                hour (when the controller is not in a sleep state).
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.percentage_used
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: storage
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
              trigger_prototypes:
                - uuid: e2bc2b0e195446d7973037be8e41eb6f
                  expression: 'last(/SMART by Zabbix agent 2/smart.disk.percentage_used[{#NAME}])>90'
                  name: 'SMART [{#NAME}]: NVMe disk percentage using is over 90% of estimated endurance'
                  priority: AVERAGE
                  tags:
                    - tag: scope
                      value: notice
            - uuid: 62f98419c8034f389a5be3755eac8938
              name: 'SMART [{#NAME}]: Serial number'
              type: DEPENDENT
              key: 'smart.disk.sn[{#NAME}]'
              value_type: CHAR
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.serial_number
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: inventory
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
              trigger_prototypes:
                - uuid: 7257c02f398f4338ace1eb3a07cb7362
                  expression: 'last(/SMART by Zabbix agent 2/smart.disk.sn[{#NAME}],#1)<>last(/SMART by Zabbix agent 2/smart.disk.sn[{#NAME}],#2) and length(last(/SMART by Zabbix agent 2/smart.disk.sn[{#NAME}]))>0'
                  name: 'SMART [{#NAME}]: Disk has been replaced'
                  event_name: 'SMART [{#NAME}]: Disk has been replaced (new serial number received)'
                  priority: INFO
                  description: 'Device serial number has changed. Acknowledge to close the problem manually.'
                  manual_close: 'YES'
                  tags:
                    - tag: scope
                      value: notice
            - uuid: 2f5b054d7a644e029a195d17f525c191
              name: 'SMART [{#NAME}]: Temperature'
              type: DEPENDENT
              key: 'smart.disk.temperature[{#NAME}]'
              units: °C
              description: 'Current drive temperature.'
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.temperature
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: temperature
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
              trigger_prototypes:
                - uuid: cd09aebe3ca146119cdf5b977bf6b018
                  expression: 'avg(/SMART by Zabbix agent 2/smart.disk.temperature[{#NAME}],5m)>{$SMART.TEMPERATURE.MAX.CRIT}'
                  name: 'SMART [{#NAME}]: Average disk temperature is critical'
                  event_name: 'SMART [{#NAME}]: Average disk temperature is critical (over {$SMART.TEMPERATURE.MAX.CRIT}°C for 5m)'
                  priority: AVERAGE
                  tags:
                    - tag: scope
                      value: notice
                - uuid: aaa5acb3196b481f894998c0ca5ea165
                  expression: 'avg(/SMART by Zabbix agent 2/smart.disk.temperature[{#NAME}],5m)>{$SMART.TEMPERATURE.MAX.WARN}'
                  name: 'SMART [{#NAME}]: Average disk temperature is too high'
                  event_name: 'SMART [{#NAME}]: Average disk temperature is too high (over {$SMART.TEMPERATURE.MAX.WARN}°C for 5m)'
                  priority: WARNING
                  dependencies:
                    - name: 'SMART [{#NAME}]: Average disk temperature is critical'
                      expression: 'avg(/SMART by Zabbix agent 2/smart.disk.temperature[{#NAME}],5m)>{$SMART.TEMPERATURE.MAX.CRIT}'
                  tags:
                    - tag: scope
                      value: notice
            - uuid: 434b338d88e041dd9b6a0b7aaa403076
              name: 'SMART [{#NAME}]: Self-test passed'
              type: DEPENDENT
              key: 'smart.disk.test[{#NAME}]'
              value_type: CHAR
              description: 'The disk is passed the SMART self-test or not.'
              preprocessing:
                - type: JSONPATH
                  parameters:
                    - $.self_test_passed
                - type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              master_item:
                key: 'smart.disk.get[{#PATH},"{#RAIDTYPE}"]'
              tags:
                - tag: component
                  value: health
                - tag: diskname
                  value: '{#NAME}'
                - tag: disktype
                  value: '{#DISKTYPE}'
              trigger_prototypes:
                - uuid: 5fa97df4012e45279fb55724f617ef4a
                  expression: 'last(/SMART by Zabbix agent 2/smart.disk.test[{#NAME}])="false"'
                  name: 'SMART [{#NAME}]: Disk self-test is not passed'
                  priority: HIGH
                  tags:
                    - tag: scope
                      value: notice
          overrides:
            - name: Self-test
              step: '1'
              filter:
                conditions:
                  - macro: '{#DISKTYPE}'
                    value: nvme
              operations:
                - operator: LIKE
                  value: Self-test
                  discover: NO_DISCOVER
            - name: 'Not NVMe'
              step: '2'
              filter:
                conditions:
                  - macro: '{#DISKTYPE}'
                    value: nvme
                    operator: NOT_MATCHES_REGEX
              operations:
                - operator: REGEXP
                  value: Media|Percentage|Critical
                  discover: NO_DISCOVER
            - name: Raw_Read_Error_Rate
              step: '3'
              filter:
                conditions:
                  - macro: '{#ATTRIBUTES}'
                    value: Raw_Read_Error_Rate
              operations:
                - operator: REGEXP
                  value: Raw_Read_Error_Rate
                  discover: DISCOVER
            - name: Spin_Up_Time
              step: '4'
              filter:
                conditions:
                  - macro: '{#ATTRIBUTES}'
                    value: Spin_Up_Time
              operations:
                - operator: REGEXP
                  value: Spin_Up_Time
                  discover: DISCOVER
            - name: Start_Stop_Count
              step: '5'
              filter:
                conditions:
                  - macro: '{#ATTRIBUTES}'
                    value: Start_Stop_Count
              operations:
                - operator: REGEXP
                  value: Start_Stop_Count
                  discover: DISCOVER
            - name: Power_Cycle_Count
              step: '6'
              filter:
                conditions:
                  - macro: '{#ATTRIBUTES}'
                    value: Power_Cycle_Count
              operations:
                - operator: REGEXP
                  value: Power_Cycle_Count
                  discover: DISCOVER
            - name: Reported_Uncorrect
              step: '7'
              filter:
                conditions:
                  - macro: '{#ATTRIBUTES}'
                    value: Reported_Uncorrect
              operations:
                - operator: REGEXP
                  value: Reported_Uncorrect
                  discover: DISCOVER
            - name: Seek_Error_Rate
              step: '8'
              filter:
                conditions:
                  - macro: '{#ATTRIBUTES}'
                    value: Seek_Error_Rate
              operations:
                - operator: REGEXP
                  value: Seek_Error_Rate
                  discover: DISCOVER
            - name: Bad_Block_Rate
              step: '9'
              filter:
                conditions:
                  - macro: '{#ATTRIBUTES}'
                    value: Bad_Block_Rate
              operations:
                - operator: REGEXP
                  value: Bad_Block_Rate
                  discover: DISCOVER
            - name: Program_Fail_Count_Chip
              step: '10'
              filter:
                conditions:
                  - macro: '{#ATTRIBUTES}'
                    value: Program_Fail_Count_Chip
              operations:
                - operator: REGEXP
                  value: Program_Fail_Count_Chip
                  discover: DISCOVER
            - name: Reallocated_Sector_Ct
              step: '11'
              filter:
                conditions:
                  - macro: '{#ATTRIBUTES}'
                    value: Reallocated_Sector_Ct
              operations:
                - operator: REGEXP
                  value: Reallocated_Sector_Ct
                  discover: DISCOVER
      tags:
        - tag: class
          value: storage
        - tag: target
          value: hdd
        - tag: target
          value: ssd
      macros:
        - macro: '{$SMART.DISK.NAME.MATCHES}'
          value: '^.*$'
          description: 'This macro is used in the filter of attribute and disk discoveries. It can be overridden on the host or linked on the template level.'
        - macro: '{$SMART.DISK.NAME.NOT_MATCHES}'
          value: CHANGE_IF_NEEDED
          description: 'This macro is used in the filter of attribute and disk discoveries. It can be overridden on the host or linked on the template level.'
        - macro: '{$SMART.TEMPERATURE.MAX.CRIT}'
          value: '65'
          description: 'This macro is used for trigger expression. It can be overridden on the host or linked on the template level.'
        - macro: '{$SMART.TEMPERATURE.MAX.WARN}'
          value: '50'
          description: 'This macro is used for trigger expression. It can be overridden on the host or linked on the template level.'
      dashboards:
        - uuid: 074166cdd4d54f7e89bd7488283ba5be
          name: 'SMART: Overview'
          pages:
            - name: Temperature
              widgets:
                - type: graphprototype
                  width: '72'
                  height: '20'
                  fields:
                    - type: ITEM_PROTOTYPE
                      name: itemid.0
                      value:
                        host: 'SMART by Zabbix agent 2'
                        key: 'smart.disk.temperature[{#NAME}]'
                    - type: STRING
                      name: reference
                      value: AAAAA
                    - type: INTEGER
                      name: rows
                      value: '5'
                    - type: INTEGER
                      name: source_type
                      value: '3'
            - name: 'Power On'
              widgets:
                - type: graphprototype
                  width: '72'
                  height: '20'
                  fields:
                    - type: ITEM_PROTOTYPE
                      name: itemid.0
                      value:
                        host: 'SMART by Zabbix agent 2'
                        key: 'smart.disk.hours[{#NAME}]'
                    - type: STRING
                      name: reference
                      value: AAAAB
                    - type: INTEGER
                      name: rows
                      value: '5'
                    - type: INTEGER
                      name: source_type
                      value: '3'
